How To Change Line Color In Corel Draw X8

Quick links to procedures on this folio:

Formatting lines and outlines

Lines are treated the same way as outlines of closed shapes, such as ellipses and polygons. In some programs, outlines are known every bit strokes or thick lines.

Yous can alter the advent of both lines and outlines by using the controls in the Outline section of the Object properties docker, the Outline pen dialog box, and the property bar. For case, you lot can specify the color, width, and mode of lines and outlines.

You lot can cull a corner style to control the corner shape in lines and choose a line cap style to change the appearance of a line'southward endpoints. By default, an outline is applied on summit of an object's fill, simply you can apply it behind the fill up, with the fill up overlapping the outline. You can also link the outline thickness to an object'southward size and so that the outline increases when you increase the object's size and decreases when yous decrease the object'due south size. In addition, you can set the outline to print on top of underlying colors, without removing them during press.

Different corner styles were applied to the upper and lower row of triangles. Different line caps were applied to the lines in the upper-right corner. Arrowheads were applied to the lines in the lower-correct corner.

You can set the miter limit to decide the corner shape in objects containing lines that run into at sharp angles. Corners with angles above the miter limit are pointed (mitered); corners with angles below the miter limit are beveled (squared off).

In add-on, you can specify the position of the outline by placing it outside or inside the object, or centering information technology so that it overlaps equally the outside and the inside of an object. The issue of outline position options are more obvious with thick outlines.

You can specify the position of the outline. Outline options from left to right: Outside, Centered, Inside.

The default line and outline backdrop for each new object that you draw are as follows:

However, you can change any of these default line and outline properties at any time.

You tin create calligraphic outlines. A calligraphic outline varies in thickness, creating the upshot of a hand-made drawing.

Creating cuttable outlines

To create a cuttable outline for devices such as plotters, vinyl cutters and Print-Cut devices, you need to assign the appropriate predefined color name (commonly CutContour) that is specified by the device manufacturer.

Note that cuttable outlines do not print when identified by the RIP or Impress-Cutting device. If you want to make the outlines printable, y'all tin can use the Object Shaping Boundary command. For more data, encounter To create a purlieus effectually selected objects.

3 .

In the Outline section, blazon a value in the Width box.

If the Outline section is not displayed, click Outline.

Y'all can too specify line and outline settings in the Outline pen dialog box. To admission the Outline pen dialog box, double-click the Outline icon on the condition bar.

Yous can also modify the outline width of a selected object by typing a value in the Outline width box on the property bar.

3 .

In the Outline section, click one of the following buttons to prepare the shape of corners:

If the Outline section is non displayed, click Outline.

If the Stretch box is not displayed, click the arrow push at the bottom of the Outline section.

5 .

Type a value in the Tilt beak box to alter the orientation of the pen in relation to the drawing surface.

To reset the Stretch and Tilt nib values to their original values, click the Default button.

You can as well create a calligraphic outline in the Outline pen dialog box. To access the Outline pen dialog box, double-click the Outline icon on the condition bar.

You tin also adapt the Stretch and Angle values by dragging in the Bill shape preview box.

1 .

Using the Choice tool, click on an empty space in the drawing window to deselect all objects.

3 .

In the Change document defaults dialog box, enable the check boxes for the objects and text whose default settings you desire to change, and click OK.

Not all suite components documented in this Help are available in our Trial, Bookish, and OEM versions. Unavailable components may include Corel applications, product features, third-party utilities, and extra content files.